When your boiler stops working, it can be very frustrating. This is because you are relying on it to provide your home with heat and hot water. The good news is that most of the time it is just a minor issue. Some of these issues can be easily fixed by following some simple steps. Other problems may require the help of a professional. This is especially true if your boiler is over 10 years old. Find out https://www.readysteadysell.co.uk/can-you-sell-a-house-with-a-faulty-boiler/

The first thing you should check is whether the boiler is plugged in or not. If you have a gas boiler, make sure that the supply valve is open and there is sufficient credit on your prepayment meter. You should also check that the thermostat controller is in the on position and that the clock is set correctly.

Water Wise: A Homeowner’s Guide to Identifying and Fixing Leaks for a Dry and Healthy Environment

If the boiler is plugged in but it won’t start, it might need re-programming. Check the boiler manual for advice on how to do this.

A leaking boiler can be a big problem and should be dealt with immediately. Leaks are usually caused by a broken component, such as a faulty relief valve or a corroded pipe.

If the radiators are cold at the bottom but warm at the top, this could be an indication of air in the system or rust in the pipes. It is important to note that the rusting of parts in your boiler can be dangerous if not addressed. This is why it is important to choose an engineer that is not only Gas Safe certified but also insured. This means that in the event of any damage being done during the repair, you can be compensated for it.